Lark Arms Model VOG4 Forged Lower Receiver
Semi-Auto AR15 Style Lower Receiver. Works with standard AR15 components and magazines. The bolt catch pin hole has been threaded for a 6-32 dog leg screw. The rear takedown pin detent hole is threaded for a 1/8" 6-32 set screw. The lower is also threaded for a 1/4"-28 nylon tipped upper receiver tensioning screw. All three screws are included with the lower.
Material: 7075-T6 Forged Aluminum
Finish: Hard-Coat Anodized Mil 8625 Type 3 Class 2 - Matte Black
Caliber Marking: Multi
Safety Markings: Viking Hammer Pictograms
Included: 6-32 Detent Set Screw, 6-32 Dog Leg Screw, and 1/4"-28 Upper Receiver Tensioning Screw
Made In The U.S.A.
Lark Arms Model VOG4 Billet Upper Receiver
AR15 Style Side Charging Upper Receiver Manufactured to compliment the VOG4 Lower Receiver. Works with standard AR15 components and magazines.
Material: Machined from Billet Machined 7075-T6 Aluminum
Finish: Hard Coat Anodized Black
Action: Right Handed Operation Semi-Auto
Included: An M16 Cut Side Bolt Carrier Group designed for use with .223, 5.56, .300BLK, .223 Wylde and other 5.56/.223 wildcats. Carrier is 8620 Steel, bolt is 9310 Steel, and gas key is staked. BCG is MPI Inspected.
Made In The U.S.A.
Lark Arms and Mickler & Assoc., Inc. recommends Lancer, ProMag and Magpul magazines for use in the VOG4 lower receiver. Lark Arms and Mickler & Assoc., Inc. abides by all state, federal, and local laws regarding magazines. If an illegal magazine is ordered to your state, your order will be processed with the magazines removed. Lark Arms applies the laws for civilian magazine purchases to all non-governmental magazine purchases within a state.
Product Warranty Information
Lark Arms products have been designed and built a higher standard often demanded by the discriminating consumer.
Our one (1) year limited warranty covers manufacturing defects that may render the product unsafe, inoperable, and/or out of spec only. Warranty does not cover reloads, over-pressured loads, abuse, wear from competition shooting, any damage due to installation of parts, installation of parts not performed by a armorer or gunsmith, or installation of non-milspec parts to include but not limited to any device that produces a 'rapid fire' situation. Cosmetic defects are only covered for the first 10 days from the original purchase date from Mickler & Assoc., Inc.
All Sales Are Final except for product or warranty related reasons. Warranty will only be honored with a copy of the original invoice from Mickler & Assoc., Inc.
"Please note that due to the day-to-day variations of anodizing black-dye tanks, a slight variation in the color black is normal and expected."
Should you find any of the above issues with your Lark Arms products we will replace the product. Sales Tax, Shipping charges, and FFL fees are non refundable. If it is a Lark Arms mistake we will cover shipping and FFL fees. On Non-Lark Arms build products all warranties are through the original manufacturer only; no warranties are expressed or implied by Lark Arms or Mickler & Assoc., Inc.
“Product or warranty related reason” refers to any warranty or service/repair issue, or any deficiency in the craftsmanship or advertised performance of the product. It does not apply to any dealers and/or individuals who decide a different product would better suit their needs after receiving the original product. In this situation, an exchange can be made so long as the product is new, unfired, has no visible signs of parts installations, has no damage to the original finish, and is returned in the original packaging with a copy of the original sales invoice. A 20% restocking fee will apply.
The seller is not responsible for any health or safety concerns once the buyer has received the item. If any harm is incurred from the items purchased by the buyer, regardless of the harm or situation, Lark Arms and Mickler & Assoc., Inc. shares no responsibility. Buyer is solely responsible for determining if parts and installation of parts renders Lark Arms products as unsafe to shoot and/or use. Buyer is responsible for knowing all laws regarding the usage of Lark Arms products. Buyer is responsible for knowing all safety and security issues concerning purchasing, possessing, and usage of any Lark Arms product. Buyer is fully responsible for any other concerns that the buyer should have known may cause damages, injury, or death from the usage of Lark Arms products. It is recommended that every part installed on a Lark Arms product be installed by a qualified gunsmith or armorer. By purchasing a Lark Arms product, the buyer agrees to hold Lark Arms and Mickler & Assoc., Inc. harmless against damages, injury, or death, or any other concern, situation, or harm caused by defective merchandise, misuse, and/or disregard for safety and security of item(s) purchased.
Copyright: The content, organization, graphics, design, compilation, magnetic translation, digital conversion and other matters related to this Site are protected under applicable copyrights, trademarks, registered trademarks and other proprietary (including but not limited to intellectual property) rights. The copying, redistribution, use or publication by you of any such matters or any part of this Site is strictly prohibited. You do not acquire ownership rights to any content, document or other materials viewed through this Site. The posting of information or materials on this Site does not constitute a waiver of any right in such information and materials.
What Our Clients Are Saying
If you're in Leander or Cedar Park area this is a great and professional establishment for any firearm needs. David does exactly what the other reviewers say; he goes out of his way to make sure you are completely satisfied whether or not your buying anything he gives you 100 percent attention. To top it all this guy is extremely knowledgeable! I will certainly not be going anywhere else but to them." ~ E. Benitez